This bulletproof vest HO2-KR1-SP1 for local police Belgium with lasercut webbing from Sioen Ballistics was developed according to the specifications of the Belgian Police GPI95 intended for the Federal Contract from 2022 in the protection value according to the British CAST 2017 HO2 - KR1 - SP1 standard in the dark blue color.
.
Characteristics
.
- Very strong, wear-resistant outer fabric in Cordura® to guarantee a long lifespan
- «Heat and Sweat» system for maximum wearing comfort and optimization of body temperature
- Removable cushion in the back for extra support
- Easily adjustable thanks to elastic pads with Velcro (on the shoulders, stomach and back); breathable cummerbund to improve ergonomics
- Closure with a zipper in the middle; this allows you to easily put on and take off the vest without loosening the Velcro adjustments on shoulders and flanks. The zipper is loose at the bottom to make it easier to close the zipper.
- 2 large pockets next to the central closure with elastic compartment to store your mobile. Cabling can be routed through the pockets; The cabling can be passed through from left to right via the shoulders.
- Possibility to place hard plates in the vest on top of the flexible protection.
- Various zones with Velcro to attach all kinds of logos and equipment
- Thanks to a molle system with Velcro and a mounting system for G-hooks, the vest can be equipped with all kinds of pockets to store equipment
- The large surface of the Lasercut webbing makes it easy to attach accessories such as a body camera at the correct height.
- In the adjustment elastics to the back there is a possibility to store a first aid kit and other equipment such as needle-resistant gloves or other protection.
- Possibility to attach a cross protection. This meets the demand for better protection of the abdomen against both bullets and knife stabs
- This dark blue color spectrum was proposed and approved by the Belgian Federal Police for government contracts.
Protection value HO2-KR1-SP2
.
Small arms
This officially tested solution complies with the proposed HO2 requirements of the English CAST2017 standard. This provides the necessary protection against bullet impacts from the projectiles 9x19mm FMJ DM11A1B2 and 9mm JHP P9HST1 at 430 +/-10m/sec with a trauma smaller than 20mm. This solution also offers protection against impacts from projectiles 9mm HS at (350+/-15)m/sec, 9mm TFMJ at (390+/-15)m/sec, 9mm PEP 2.0 at (420+/-15), 9mm Action 6 SXF at (415+/-15)m/sec and 7.62x25 Tokarev FMJ at (440+/-15)m/sec with all traumas smaller than 20mm and also .357Magnum SPFN at 455 +/-10m/sec with all traumas smaller than 25mm.
Knife
The panels have been officially tested against stab wounds and meet the KR1 requirements of the same standard. It was tested 38 times with the P1/B blade with an energy of 24 joules (maximum penetration of 8mm) and 9 times with the P/1B blade with an energy of 36 joules (maximum penetration of 20mm allowed). In both cases there were no penetrations through the solution.
Spike
The solution meets the SP1 requirements of the same standard, it was tested 23 times with the SP spike with an energy of 24 joules, with no penetration through the protection panels.
Also meets the requirements of the KR2 level according to the old HOSDB 2007 standard
.
Sizes from XS to 3XL
.
